Skip to main content

The goal of a precision alignment is to align the machine within tolerance when at operating condition. Many, but not all, machines are aligned without the need to compensate for offline to running (OL2R) movement most often associated with thermal growth.

On the machine in question the O.E.M. manual instructs the user to compensate for thermal growth in a couple of steps:
1 – Align to tolerance.
2 – Add 14 thousandths (mils) additional shim to all four feet on the motor and recheck.
3 – After rechecking add 18 thousandths (mils) to the front foot of the blower.
With many laser shaft alignment systems this can be simplified by adding the thermal growth targets prior to starting the alignment. This greatly streamlines the alignment process and provides documentation that the alignment was completed to tolerance using thermal growth compensation.

Targets Input Using the FIXTURLASER NXA Pro

The OEM’s targets of +18 mils at the front feet of the blower and +14 mils under the motor feet are entered into the FIXTURLASER NXA Pro as shown below. There is no compensation in the horizontal plane.

Alignment report showing in tolerance with Targets

The Green coupling icons indicate the alignment is within tolerance vertically and horizontally for an 1800 RPM machine.
The red thermometer icons indicate targets to compensate for thermal growth where used for this alignment.

The values to the right of the thermometer icons indicate vertical plane targets of +18 at the front feet of the blower and +14 at the front and back motor feet. No targets were inputted for the horizontal plane.